Radio Modem Products
RF DataTech manufactures a comprehensive range of radio modem products designed to meet demanding international standards.
They are ideal for point-to-point wireless data links or point-to-multipoint applications such as alarm systems, scanning telemetry or SCADA systems.
VHF (138MHz - 225MHz), UHF (406MHz - 512MHz) and 869MHz (868MHz - 870MHz) models are available with a choice of transmit powers.
The low power radios meet the licence-exempt ETSI EN 300-220 specification for use throughout Europe while the higher power 5W versions meet the tougher European EN 300-113 requirements and the equivalent USA (FCC) and Canadian (IC) specifications.
- 150bps, 300bps, 600bps, 1200bps, 2400bps, 4800bps or 9600bps over-air data rate in 12.5kHz RF channel
- VHF, UHF & 869MHz versions available
- RS232, 5V TTL or combined RS232/RS485/RS422 data interface options
- FSK, FFSK, GMSK or 4FSK modulation automatically selected depending on data rate
- Low power consumption
- Forward Error Correction (FEC) selectable at 9k6 bps
- Highly sensitive receiver
- Supports "Store & Forward" repeater operation
- Transparent mode supports any protocol
- Additional configurable options for MODBUS & HAYES protocols
- Easy configuration using PC software
The over-air data rate can be set to a range of values between 150bps and 9600bps in a 12.5kHz channel and there is an internal buffer to cope with situations where the serial interface baud rate is set higher than the selected over-air rate. If high speeds are not required, the modem can be programmed to a slower over-air rate to take advantage of the associated improvement in receiver threshold.
At lower data speeds (1200bps and below) the radios can be configured to use either Bell 202 or V.23 tone sets for compatibility with existing equipment.
Careful attention to intermodulation performance, spurious response, adjacent channel and blocking performance, makes the product ideal for crowded telemetry radio channels.
Our Windows based configuration software WinA4P allows all the radio settings to be programmed by the user.
The table below shows our most popular modems:-
| Model | Bands | Tx Power Ranges |
RF Configs |
Interfaces | Key Features |
|---|---|---|---|---|---|
| ZRT Series |
VHF UHF 869MHz |
10mW- 50mW- |
Half- Simplex |
RS232 RS485 RS422 3.6V/5V TTL |
Low cost Compact size Panel mount |
| SRT Series |
VHF UHF |
10mW- 50mW- |
Half- Simplex |
RS232 5V TTL |
DIN Rail Mount |
| URT Series |
VHF UHF |
50mW- |
Half- Simplex |
RS232 600 ohm audio (un- |
Connector compatible with Pacscom CMD400 Designed for maximum compatibility with existing networks DIN Rail Mount |
| ART Series |
UHF | 10mW- 50mW- |
Full- Half- Simplex |
RS232 5V TTL 600 ohm audio (4W- |
Dual Synthesizer for extra fast key-up Auxiliary digital inputs and outputs DIN Rail Mount |
| XRT Base-Station Series |
UHF | 50mW- 500mW- |
Full- Half- Simplex |
RS232 600 ohm audio (4w- |
Works with ZRT, SRT, URT & ART Modems Dual Synthesizer Duplicated configurations possible using two XRT radio shelves and matching XRT9000X baychanger shelf. 19" Rack Mount |
| WRT Series (photo soon) Product available end 2009 |
433MHz 458MHz 464MHz 472MHz 868MHz 902MHz |
1mW 10mW 25mW |
Half- Simplex |
RS232 RS485 RS422 3.6V/5V TTL |
Low cost, low power radios for unlicensed bands "Listen before Transmit" Supports MODBUS & WASP Protocol Compact size |
Main UK Site
USA Site
български
Česky
Dansk
Ελληνικά
Español
Lietuvių
Magyar
Norsk
Polski
Português
Română
Pусский
Slovenščina
Svenska
Türkçe